You must have commonly observed a dense white salt-like powdered substance covering your tiles or grout. The problem is how much ever you scrub, it just refuses to go. If you are wondering what kind of mark it is, you need not worry, chances are high it is efflorescence.

It is the residue of calcium and mineral deposits that originates due to masonry work. There are many people who mistake efflorescence for mould but unlike it does not grow and also does not have any potential health hazards. But the good news is you can easily wipe off efflorescence with an effective Efflorescence Remover. 

What is efflorescence? 

Before you understand the ways to remove efflorescence you should understand what efflorescence is. Efflorescence is a kind of mineral deposits that settle on the tile surface once the water evaporates, thereby leaving a white residue.

Sometimes when showers are installed incorrectly and the water is allowed to dwell underneath the tile, the water mixes with the minerals that are present in the concrete mud bed. The result is the mineral deposits travel through the shower drains through the weep holes and finally reach your tile or grout.

If a good quality efflorescence remover is not used on time, it is possible that your tiles or grout get cracked, and also the shower drains might get clogged. 

How is efflorescence formed? 

Some of the prominent reasons why efflorescence is formed are the following: 

  • First of all is there are watersoluble calcium and mineral salts present in the construction material like concrete, chances are high that efflorescence is formed. 
  • If water penetrates from somewhere into the mud bed, it is possible that it dissolves the mineral and salts into the solution, which in turn might cause the formation of efflorescence 
  • The solution travels to the top of the surface and when the water evaporates leaving a white salt-like by-product commonly known as the efflorescence 
  • It must be kept in mind that efflorescence forms on surfaces that are formed with porous materials like natural stone, brick, or wood. The reason is the surface should allow the penetration of the water inside and also water should be able to travel out.  

However, irrespective of the reason as to why efflorescence is formed, if you want to increase the life of your tiles, you should invest in a good quality efflorescence remover. 

Is it possible to remove efflorescence? 

If you are worried about the efflorescence on your tiles or grout, you may stop worrying and look for an efflorescence remover. It is because removing efflorescence is not difficult.

Usually, there are two conventional methods for removing efflorescence. One is sandblasting and the other is the use of chemical cleaners. However, you ought to keep in mind that sandblasting causes severe damage to the floor, while the use of chemical cleaners not only effectively removes the efflorescence but also keeps the tile or grout intact. 

Last, but not the least, once you have successfully removed efflorescence do not allow unnecessary moisture seepage.